Szczegóły publikacji

Opis bibliograficzny

Development of microstructure and texture after cold-rolling $Fe-24Mn-3Al-3Si$ high-manganese steel / Joanna KOWALSKA, Marcin Kowalski // Journal of Materials Engineering and Performance ; ISSN 1059-9495. — 2020 — vol. 29 iss. 3, s. 1495–1501. — Bibliogr. s. 1501. — Publikacja dostępna online od: 2019-12-16. — AMT 2019 : The XXII Physical Metallurgy and Materials Science Conference: Advanced Materials and Technologies : Bukowina Tatrzańska, June 9–12, 2019

Autorzy (2)

Słowa kluczowe

X-raymicrostructuretexturephase transformationTWIP steelrolling

Dane bibliometryczne

ID BaDAP128334
Data dodania do BaDAP2020-04-15
Tekst źródłowyURL
DOI10.1007/s11665-019-04516-y
Rok publikacji2020
Typ publikacjireferat w czasopiśmie
Otwarty dostęptak
Czasopismo/seriaJournal of Materials Engineering and Performance

Abstract

A high, 24 wt.%, manganese steel ingot was homogenized, hot-rolled, annealed at 1150 degrees C for 1 h, quenched into water and finally, up to 57%, cold-rolled. Metallographic examination revealed numerous deformation bands and deformation microtwins. The crystallographic texture of austenite was examined by means of x-ray diffraction. In its entire range, the deformation texture was dominated by a strong Goss component {110} , tending to alloy-type texture {110} , typical for metals and alloys with low stacking fault energy. EBSD analysis also showed that martensitic transformation gamma -> epsilon -> alpha' took place during cold-rolling. The crystallographic Shoji-Nishiyama relations {111}gamma parallel to{0001}epsilon and gamma parallel to epsilon between austenite (gamma) and martensite (epsilon) were found in the cold-deformed steel.

Publikacje, które mogą Cię zainteresować

artykuł
#85944Data dodania: 28.11.2014
Development of microstructure and texture in Fe-26Mn-3Si-3Al alloy during cold-rolling and annealing / Joanna KOWALSKA, Wiktoria RATUSZEK, Małgorzata WITKOWSKA, Anna ZIELIŃSKA-LIPIEC // Journal of Alloys and Compounds ; ISSN 0925-8388. — 2014 — vol. 615 Suppl. 1, s. S583–S586. — Bibliogr. s. S586, Abstr. — ISMANAM-2013 : the International Symposium on Metastable, Amorphous and Nanostructured Materials : Torino, Italy, 30 June – 5 July 2013
artykuł
#95843Data dodania: 9.2.2016
Microstructure and texture evolution during cold-rolling in the $Fe-23Mn-3Si-3Al$ alloy — Rozwój mikrostruktury i tekstury w walcowanym na zimno stopie $Fe-23Mn-3Si-3Al$ / J. KOWALSKA, W. RATUSZEK, M. WITKOWSKA, A. ZIELIŃSKA-LIPIEC, M. Kowalski // Archives of Metallurgy and Materials / Polish Academy of Sciences. Committee of Metallurgy. Institute of Metallurgy and Materials Science ; ISSN 1733-3490. — 2015 — vol. 60 iss. 3, s. 1789–1794. — Bibliogr. s. 1793–1794