Szczegóły publikacji
Opis bibliograficzny
Microstructure and texture evolution during cold-rolling in the $Fe-23Mn-3Si-3Al$ alloy — Rozwój mikrostruktury i tekstury w walcowanym na zimno stopie $Fe-23Mn-3Si-3Al$ / J. KOWALSKA, W. RATUSZEK, M. WITKOWSKA, A. ZIELIŃSKA-LIPIEC, M. Kowalski // Archives of Metallurgy and Materials / Polish Academy of Sciences. Committee of Metallurgy. Institute of Metallurgy and Materials Science ; ISSN 1733-3490. — 2015 — vol. 60 iss. 3, s. 1789–1794. — Bibliogr. s. 1793–1794
Autorzy (5)
Słowa kluczowe
Dane bibliometryczne
| ID BaDAP | 95843 |
|---|---|
| Data dodania do BaDAP | 2016-02-09 |
| Tekst źródłowy | URL |
| DOI | 10.1515/amm-2015-0306 |
| Rok publikacji | 2015 |
| Typ publikacji | artykuł w czasopiśmie |
| Otwarty dostęp | |
| Czasopismo/seria | Archives of Metallurgy and Materials |
Abstract
Fe–23wt.%Mn–3wt.%Si–3wt.%Al alloy was cast, homogenized at 1150ºC, hot-rolled at temperatures between 1200ºC and 900ºC and next cold-rolled from 5% up to 40% reductions in thickness. Microstructure and texture of this alloy, which has a low stacking fault energy, were defined after cold-rolling. Investigation of transmission electron microscopy and X-ray diffraction showed that mechanical twinning and martensitic transformations (γ<sub>fcc</sub>→ε<sub>hcp</sub> and γ<sub>fcc</sub>→ε<sub>hcp</sub>→α′<sub>bcc</sub>) took place during cold-rolling. The crystallographic Shoji-Nishiyama (S-N) {00.2}ε║{111}γ, <11.0>ε ║ <110>γ and Kurdjumov-Sachs (K-S) {111}γ║{101}α’, <101>γ║<111>α’ relations between martensite (ε, α’) and austenite (γ), were found in the coldrolled material.
Streszczenie
W artykule zamieszczono wyniki badań mikrostruktury i tekstury otrzymane dla stopu Fe–23%Mn–3%Si–3%Al (% masowe). Po odlaniu wlewek homogenizowano przy temperaturze 1150ºC, walcowano na gorąco w zakresie temperatur 1200ºC-900ºC i następnie walcowano na zimno do odkształceń od 5% do 40%. Wyniki badań uzyskane przy użyciu transmisyjnej mikroskopii elektronowej i metod dyfrakcyjnych wskazują, że podczas odkształcenia plastycznego na zimno w stopie zachodzi mechaniczne bliźniakowanie i przemiana martenzytyczna. Występują zależności krystalograficzne pomiędzy austenitem (faza γ) i martenzytem (faza ε i faza α’), które opisują zależności: Shoji-Nishiyama {00.2}ε || {111}γ, <11.0>ε || <110>γ i Kurdjumowa-Sachsa {111}γ || {110}α, <110>γ || <111>α.