Szczegóły publikacji

Opis bibliograficzny

Development of microstructure and texture in Fe-26Mn-3Si-3Al alloy during cold-rolling and annealing / Joanna KOWALSKA, Wiktoria RATUSZEK, Małgorzata WITKOWSKA, Anna ZIELIŃSKA-LIPIEC // Journal of Alloys and Compounds ; ISSN 0925-8388. — 2014 — vol. 615 Suppl. 1, s. S583–S586. — Bibliogr. s. S586, Abstr. — ISMANAM-2013 : the International Symposium on Metastable, Amorphous and Nanostructured Materials : Torino, Italy, 30 June – 5 July 2013

Autorzy (4)

Słowa kluczowe

austenitemartensitemicrostructurephase transformationhigh manganese steeltexture

Dane bibliometryczne

ID BaDAP85944
Data dodania do BaDAP2014-11-28
Tekst źródłowyURL
DOI10.1016/j.jallcom.2013.12.059
Rok publikacji2014
Typ publikacjireferat w czasopiśmie
Otwarty dostęptak
Czasopismo/seriaJournal of Alloys and Compounds

Abstract

Fe-26 wt.% Mn-3 wt.% Si-3 wt.% Al alloy was cast, forged, hot-rolled at temperatures between 1200 degrees C and 900 degrees C and cold-rolled with 5-66% reductions in thickness. The specimens which were cold-rolled 57% were annealed in the temperature range 500-750 degrees C. Microstructure and texture of this alloy, which has a low stacking fault energy, were evaluated after cold-rolling and after subsequent annealing, X-ray diffraction and transmission electron microscopy showed that mechanical twinning and martensitic transformations (gamma -> epsilon and gamma -> epsilon -> alpha ') took place during cold-rolling. The crystallographic Burgers relations {0 0 0 1}epsilon parallel to {1 1 1}gamma and < 1 1 2 0 >epsilon parallel to < 1 1 0 >gamma between martensite (epsilon) and austenite (gamma), were found in the cold-rolled material. During annealing the reverse martensite to austenite transformation occurred. (C) 2013 Elsevier B.V. All rights reserved.

Publikacje, które mogą Cię zainteresować

artykuł
#92672Data dodania: 15.10.2015
Microstructure and texture characteristics of the metastable $Fe-21Mn-3Si-3Al$ alloy after cold deformation / Joanna KOWALSKA, Wiktoria RATUSZEK, Małgorzata WITKOWSKA, Anna ZIELIŃSKA-LIPIEC, Tomasz TOKARSKI // Journal of Alloys and Compounds ; ISSN 0925-8388. — 2015 — vol. 643 suppl. 1, s. S39–S45. — Bibliogr. s. S45, Abstr. — ISMANAM-2014 : Cancun, México, June 30th–July 4th
artykuł
#128334Data dodania: 15.4.2020
Development of microstructure and texture after cold-rolling $Fe-24Mn-3Al-3Si$ high-manganese steel / Joanna KOWALSKA, Marcin Kowalski // Journal of Materials Engineering and Performance ; ISSN 1059-9495. — 2020 — vol. 29 iss. 3, s. 1495–1501. — Bibliogr. s. 1501. — Publikacja dostępna online od: 2019-12-16. — AMT 2019 : The XXII Physical Metallurgy and Materials Science Conference: Advanced Materials and Technologies : Bukowina Tatrzańska, June 9–12, 2019