Szczegóły publikacji

Opis bibliograficzny

Effect of Zr purity and oxygen content on the structure and mechanical properties of melt-spun and suction-cast $Cu_{46}Zr_{42}Al_{7}Y_{5}$ alloy / T. KOZIEŁ. J. Latuch, G. CIOS, P. BAŁA // Archives of Metallurgy and Materials / Polish Academy of Sciences. Committee of Metallurgy. Institute of Metallurgy and Materials Science ; ISSN 1733-3490. — 2016 — vol. 61 iss. 2B, s. 1215–1219. — Bibliogr. s. 1219. — P. Bała - dod. afiliacja: ACMiN

Autorzy (4)

Słowa kluczowe

metallic glassesbulk metallic glassesmelt spinningsuction casting

Dane bibliometryczne

ID BaDAP98911
Data dodania do BaDAP2016-08-05
Tekst źródłowyURL
DOI10.1515/amm-2016-0201
Rok publikacji2016
Typ publikacjiartykuł w czasopiśmie
Otwarty dostęptak
Czasopismo/seriaArchives of Metallurgy and Materials

Abstract

The effect of oxygen content in zirconium on the structure and mechanical properties of the Cu46Zr42Al7Y5 alloy, in the form of melt-spun ribbons and suction-cast rods, was investigated. Two types of Zr, rod and crystal bar of different nominal purities and oxygen contents, were used to synthesize the alloy by arc melting. Rapidly solidified ribbons were produced by melt spinning and their amorphous structures were confirmed by X-ray diffractometry (XRD) and differential scanning calorimetry (DSC). Bulk samples in the form of rods were cast using a special water-cooled suction casting unit attached to the arc melting system. XRD and DSC studies proved the amorphous structure of the bulk alloy synthesized from low-oxygen Zr and partial crystallization of the same alloy for high-oxygen Zr. In both bulk samples, uniformly distributed crystalline particles were identified as yttrium oxides. Higher mean compressive strength of amorphous alloy was observed. The hardness of amorphous phase was close to 500 HV1 in both bulk alloys, while the hardness of crystalline dendritic areas, observed in the alloy synthesized from high oxygen Zr, was lower by about 50 HV1.

Publikacje, które mogą Cię zainteresować

artykuł
#76868Data dodania: 21.10.2013
Structure of the amorphous-crystalline $Fe_{66}Cu_{6}B_{19}Si_{5}Nb_{4}$ alloy obtained by the melt-spinning process — Struktura amorficzno-krystalicznego stopu $Fe_{66}Cu_{6}B_{19}Si_{5}Nb_{4}$ otrzymanego metodą melt-spinning / T. KOZIEŁ, J. Latuch, A. ZIELIŃSKA-LIPIEC // Archives of Metallurgy and Materials / Polish Academy of Sciences. Committee of Metallurgy. Institute of Metallurgy and Materials Science ; ISSN 1733-3490. — 2013 — vol. 58 iss. 2, s. 601–605. — Bibliogr. s. 604–605
artykuł
#78836Data dodania: 14.1.2014
Structure of melt-spun $Fe-Cu-Si-B-Nb$ alloy / Tomasz KOZIEŁ, Jerzy Latuch, Sławomir KĄC // Journal of Alloys and Compounds ; ISSN 0925-8388. — 2014 — vol. 586 Suppl. 1, s. S121–S125. — Bibliogr. s. S124–S125, Abstr. — ISMANAM-2012 : International Symposium on Metastable, Amorphous and Nanostructure Materials : Moscow, 18 to 22 of June 2012