Szczegóły publikacji
Opis bibliograficzny
Experimental and thermodynamic study of selected in-situ composites from the $Fe-Cr-Ni-Mo-C$ system / K. WIECZERZAK, P. BAŁA, R. DZIURKA, M. STĘPIEŃ, T. TOKARSKI, G. CIOS, K. GÓRECKI // Archives of Metallurgy and Materials / Polish Academy of Sciences. Committee of Metallurgy. Institute of Metallurgy and Materials Science ; ISSN 1733-3490. — 2016 — vol. 61 iss. 2B, s. 1241–1247. — Bibliogr. s. 1247. — P. Bała - dod. afiliacja: ACMiN
Autorzy (7)
Słowa kluczowe
Dane bibliometryczne
| ID BaDAP | 98910 |
|---|---|
| Data dodania do BaDAP | 2016-08-05 |
| Tekst źródłowy | URL |
| DOI | 10.1515/amm-2016-0205 |
| Rok publikacji | 2016 |
| Typ publikacji | artykuł w czasopiśmie |
| Otwarty dostęp |  |
| Czasopismo/seria | Archives of Metallurgy and Materials |
Abstract
The aim of the study was to synthesize and characterize the selected in-situ composites from the Fe-Cr-Ni-Mo-C system, additionally strengthened by intermetallic compounds. The project of the alloys was supported by thermodynamic simulations using Calculation of Phase Diagram approach via Thermo-Calc. Selected alloys were synthesized in an arc furnace in a high purity argon atmosphere using a suction casting unit. The studies involved a range of experimental techniques to characterize the alloys in the as-cast state, including optical emission spectrometry, light microscopy, scanning electron microscopy, electron microprobe analysis, X-ray diffraction and microhardness tests. These experimental studies were compared with the Thermo-Calc data and high resolution dilatometry. The results of investigations presented in this paper showed that there is a possibility to introduce intermetallic compounds, such as χ and σ, through modification of the chemical composition of the alloy with respect to Nieq and Creq. It was found that the place of intermetallic compounds precipitation strongly depends on matrix nature. Results presented in this paper may be successfully used to build a systematic knowledge about the group of alloys with a high volume fraction of complex carbides, and high physicochemical properties, additionally strengthened by intermetallic compounds.
