Szczegóły publikacji
Opis bibliograficzny
The renewable bismuth bulk annular band working electrode: fabrication and application in the adsorptive stripping voltammetric determination of nickel(II) and cobalt(II) / Bogusław BAŚ, Krystian WĘGIEL, Katarzyna JEDLIŃSKA // Analytica Chimica Acta ; ISSN 0003-2670. — 2015 — vol. 881, s. 44–53. — Bibliogr. s. 52–53, Abstr. — Publikacja dostępna online od: 2015-05-07
Autorzy (3)
Słowa kluczowe
Dane bibliometryczne
| ID BaDAP | 89799 |
|---|---|
| Data dodania do BaDAP | 2015-06-18 |
| Tekst źródłowy | URL |
| DOI | 10.1016/j.aca.2015.05.005 |
| Rok publikacji | 2015 |
| Typ publikacji | artykuł w czasopiśmie |
| Otwarty dostęp |  |
| Czasopismo/seria | Analytica Chimica Acta |
Abstract
The paper presents the first report on fabrication and application of a user friendly and mercury free electrochemical sensor, with the renewable bismuth bulk annular band working electrode (RBiABE), in stripping voltammetry (SV). The sensor body is partly filled with the internal electrolyte solution, in which the RBiABE is cleaned and activated before each measurement. Time of the RBiABE contact with the sample solution is precisely controlled. The usefulness of this sensor was tested by Ni(II) and Co(II) traces determination by means of differential pulse adsorptive stripping voltammetry (DP AdSV), after complexation with dimethylglyoxime (DMG) in ammonia buffer (pH 8.2). The experimental variables (composition of the supporting electrolyte, pre-concentration potential and time, potential of the RBiABE activation, and DP parameters), as well as possible interferences, were investigated. The linear calibration graphs for Ni(II) and Co(II), determined individually and together, in the range from 1×10-8 to 70×10-8molL-1 and from 1×10-9 to 70×10-9molL-1 respectively, were obtained. The calculated limit of detection (LOD), for 30s of the accumulation time, was 3×10-9molL-1 for Ni(II) in case of a single element's analysis, whereas the LOD was 5×10-9molL-1 for Ni(II) and 3×10-10molL-1 for Co(II), when both metal ions were measured together. The repeatability of the Ni(II) and Co(II) adsorptive stripping voltammetric signals obtained at the RBiABE were equal to 5.4% and 2.5%, respectively (n=5). Finally, the proposed method was validated by determining Ni(II) and Co(II) in the certified reference waters (SPS-SW1 and SPS-SW2) with satisfactory results. © 2015.
