Szczegóły publikacji

Opis bibliograficzny

Three-dimensional analysis by serial sectioning of cubic zirconia sinters / P. Bobrowski, M. Faryna, Z. PĘDZICH // W: APMAS 2014 : 4th international congress in advances in Applied Physics and Materials Science : 24–27 April 2014, Fethiye, Turkey / eds. Ahmet Yavuz Oral, [et al.]. — [Turkey : AIP Publishing LLC], 2015. — ( AIP Conference Proceedings ; ISSN  0094-243X ; 1653 ). — ISBN: 978-0-7354-1295-8. — S. 020022/=1–020022/=9. — Bibliogr. s. 020022/=8–020022/=9, Abstr.

Autorzy (3)

Słowa kluczowe

ceramicsmicroporous materialselectron microscopy

Dane bibliometryczne

ID BaDAP89631
Data dodania do BaDAP2015-06-12
DOI10.1063/1.4914213
Rok publikacji2015
Typ publikacjimateriały konferencyjne (aut.)
Otwarty dostęptak
Konferencja4th International Congress in Advances in Applied Physics and Materials Science
Czasopismo/seriaAIP Conference Proceedings

Abstract

Three-dimensional electron backscatter diffraction technique was used for the characterization of grain boundary geometry and pore morphology in cubic zirconia. A set of three samples composed of cubic yttria stabilized zirconia, sintered under different conditions was investigated. Analysis of grain boundaries and pore structure was carried out in a dual-beam scanning electron microscope. For each sample, a volume of 15 center dot 10(3) mu m(3) was investigated. The results of three-dimensional microstructure analysis were compared to the results derived from regular, two-dimensional maps of the area of 2500 mu m(2). Based on two-dimensional and three-dimensional data the average grain diameter, number of grains, average number of neighbors and porosity were calculated. The average grain diameter varied in the range from 2.39 mu m to 2.91 mu m and from 3.00 mu m to 3.79 mu m, while the level of porosity varied in the range from 1.22% to 1.77% and from 1.30% to 5.61% for two-dimensional and three-dimensional data, respectively. The analysis of grain boundary networks revealed a strong dependence between grain boundary density and sample preparation parameters. The parameters of the sintering process affected also the size and distribution of pores. The comparison of the results of 2D and 3D materials characterization revealed significant differences in the values of calculated microstructure parameters.

Publikacje, które mogą Cię zainteresować

artykuł
#91554Data dodania: 8.9.2015
Three-dimensional microstructural characterization of porous cubic zirconia / Piotr Bobrowski, Zbigniew PĘDZICH, Marek Faryna // Micron ; ISSN 0968-4328. — 2015 — vol. 78, s. 73–78. — Bibliogr. s. 77–78, Abstr.
fragment książki
#83826Data dodania: 20.9.2014
Three-dimensional microstructure analysis of cubic zirconia sinters by FIB-SEM serial sectioning / Piotr Bobrowski, Marek Faryna, Zbigniew PĘDZICH // W: EM2014 : XV international conference on Electron Microscopy : 15–18 September, 2014, Kraków, Poland : programme and abstracts / AGH University of Science and Technology. International Centre of Electron Microscopy for Materials Science. Faculty of Metals Engineering and Industrial Computer Science, Polish Society for Microscopy, Committee of Materials Science of the Polish Academy of Sciences. — Kraków : Wydawnictwo Naukowe Akapit, 2014. — Opis częśc. wg okł. — ISBN: 978-83-63663-48-3. — S. 55–56. — Bibliogr. s. 56