Szczegóły publikacji

Opis bibliograficzny

The BTEX emission from moulding sands with furan resin dependence on the VOC content and loss on ignition / S. ŻYMANKOWSKA-KUMON // Metalurgija = Metallurgy ; ISSN 0543-5846. — 2015 — vol. 54 no. 4, s. 607–610. — Bibliogr. s. 610

Autor

Słowa kluczowe

moulding sandfuran resincastingsBTEXVOC

Dane bibliometryczne

ID BaDAP88986
Data dodania do BaDAP2015-05-21
Tekst źródłowyURL
Rok publikacji2015
Typ publikacjiartykuł w czasopiśmie
Otwarty dostęptak
Czasopismo/seriaMetalurgija

Abstract

The article contains the results of emission BTEX (benzene, toluene, ethylobenzene and xylenes) during thermal destruction (500 - 1300 degrees C) of moulding sand with furan resin. This furan resin is with a high content of free furfuryl alcohol (about 80 %). Knowledge of emissions of these compounds allows the assessment the harmfulness of a given moulding sand. Quantitative analysis of BTEX is highly complex and requires using of modern equipment (e.g. gas chromatography - mass spectrometry). Therefore, an attempt to assess potential emissions of BTEX compounds from a given moulding sand based on measurements of total volatile organic compounds (VOC) emission and loss on ignition (LOI). These measurements are less time-consuming and do not require expensive equipment.

Publikacje, które mogą Cię zainteresować

artykuł
#82958Data dodania: 21.8.2014
Assessment of the BTEX emission from moulding sands with furan resin dependence on the VOC content and lost on ignition / S. ŻYMANKOWSKA-KUMON, M. HOLTZER // Metalurgija = Metallurgy ; ISSN 0543-5846. — 2014 — vol. 53 no. 3, s. 411. — Brak afiliacji AGH. — SHMD'2014 : 11th symposium of Croatian Metallurgical Society = Simpozij Hrvatskog Metalurškog Društva : materials and metallurgy : Šibenik, Croatia, June 22–26, 2014 : summaries of abstract
artykuł
#82911Data dodania: 21.8.2014
Emission of polycyclic aromatic hydrocarbons (PAHs) and benzene, toluene, ethylbenzene and xylene (BTEX) from the furan moulding sands with addition of the reclaim / M. HOLTZER, A. BOBROWSKI, R. DAŃKO, A. KMITA, S. ŻYMANKOWSKA-KUMON, M. Kubecki, M. GÓRNY // Metalurgija = Metallurgy ; ISSN 0543-5846. — 2014 — vol. 53 no. 4, s. 451–454. — Bibliogr. s. 454