Szczegóły publikacji

Opis bibliograficzny

Influence of casting velocity on structure and properties of AlFe0,5 alloy / Michał JABŁOŃSKI, Tadeusz KNYCH, Andrzej MAMALA, Maciej Palczewski // Key Engineering Materials ; ISSN 1013-9826. — 2015 — vol. 641, s. 56–62. — Bibliogr. s. 61–62, Abstr. — New materials and processing technologies : International Conference of Non-Ferrous Metals - Processing and New Materials (ICNFM) : June 4–6, 2014, Wisła, Poland

Autorzy (4)

Słowa kluczowe

wire drawingAlFe0,5 alloyelectrical propertieshorizontal direct chill casting

Dane bibliometryczne

ID BaDAP88149
Data dodania do BaDAP2015-03-07
Tekst źródłowyURL
DOI10.4028/www.scientific.net/KEM.641.56
Rok publikacji2015
Typ publikacjireferat w czasopiśmie
Otwarty dostęptak
Czasopismo/seriaKey Engineering Materials

Abstract

The effect of iron addition on the structure and properties of aluminium wire rod obtained in the laboratory horizontal direct chill casting process has been analyzed. In addition, the impact of the casting speed on the properties of aluminium bars, containing the 0.5 wt% of Fe, and laboratory wire drawing process has been examined. The addition of iron increase the strength and plasticity of aluminium wire rod in as-cast condition and after wire drawing process, while the electrical conductivity drop acceptable. Moreover, by improving the plasticity of wires became possible to increase the deformability limit, measured by the reduction in the wire diameter by drawing to a level of less than 0.5 mm. Small-diameter wires are used for the construction of automotive wire harnesses, cables battery or winding wires. It has been shown that iron is beneficial for mechanical and technological properties of aluminium, and the horizontal direct chill casting process by graphite crystallizer may be an alternative solution in comparison with industrial scale of continuous casting and rolling by Properzi method (CCR) or Southwire SCR process in the context of the preparation of smaller amounts of material with scrap metals. © (2015) Trans Tech Publications, Switzerland.

Publikacje, które mogą Cię zainteresować

artykuł
#109968Data dodania: 29.11.2017
Influence of Fe and Si addition on the properties and structure conductivity aluminium / M. JABŁOŃSKI, T. KNYCH, A. MAMALA, B. SMYRAK, K. Wojtaszek // Archives of Metallurgy and Materials / Polish Academy of Sciences. Committee of Metallurgy. Institute of Metallurgy and Materials Science ; ISSN 1733-3490. — 2017 — vol. 62 iss. 3, s. 1541–1547. — Bibliogr. s. 1547
artykuł
#162823Data dodania: 24.9.2025
Effect of casting parameters on the structure and properties of CuZn39Pb / M. JABŁOŃSKI // Archives of Foundry Engineering [Dokument elektroniczny]. — Czasopismo elektroniczne ; ISSN 2299-2944. — Tytuł poprz.: Archiwum Odlewnictwa. — 2025 — vol. 25 no. 3, s. 116–123. — Wymagania systemowe: Adobe Reader. — Bibliogr. s. 122–123, Abstr. — Publikacja dostępna online od: 2025-07-23