Szczegóły publikacji

Opis bibliograficzny

An SEM/EBSD study of shear bands formation in $Al-0.23%$ wt.Zr alloy deformed in plane strain compression — Krystalograficzne aspekty formowania się pasm ścinania w stopie $Al-0.23%$ wag.Zr odkształcanym w próbie nieswobodnego ściskania / H. Paul, P. ULIASZ, M. Miszczyk, W. Skuza, T.  KNYCH // Archives of Metallurgy and Materials / Polish Academy of Sciences. Committee of Metallurgy. Institute of Metallurgy and Materials Science ; ISSN  1733-3490 . — 2013 — vol. 58 iss. 1, s. 145–150. — Bibliogr. s. 150

Autorzy (5)

Słowa kluczowe

shear bandslow temperature deformationmicrostructureelectron diffractiontexture

Dane bibliometryczne

ID BaDAP73081
Data dodania do BaDAP2013-04-16
DOI10.2478/v10172-012-0165-6
Rok publikacji2013
Typ publikacjiartykuł w czasopiśmie
Otwarty dostęptak
Czasopismo/seriaArchives of Metallurgy and Materials

Streszczenie

W pracy analizowano wpływ rotacji sieci krystalicznej wywołanej pojawieniem się pasm ścinania na propagacje poślizgu poprzez granice ziaren oraz na ewolucje tekstury. Badania prowadzono na próbkach stopu Al-0.23%wag.Zr, jako reprezentatywnym dla grupy metali o średniej i dużej energii błędu ułożenia. W stanie wyjściowym w mikrostrukturze stopu dominowały duże, silnie spłaszczone ziarna, bliźniaczo względem siebie zorientowane. Z odlanego wlewka wycinano próbki w ten sposób, ze płaszczyzny zblizniaczenia usytuowane były równolegle do płaszczyzny ściskania. Badania zachowania umocnieniowego analizowano w próbie nieswobodnego ściskania prowadzonej w temperaturze 77K. Próbki odkształcano do zakresu -50% zgniotu. Analizę zmian strukturalnych prowadzono w oparciu o pomiary orientacji lokalnych w SEM wyposażonym w działo o emisji polowej. Wyniki pomiarów orientacji lokalnych pokazują, że w obszarach zajmowanych przez makroskopowe pasma ścinania występuje ścisle zdefiniowana tendencja rotacji sieci krystalicznej, pomimo, że początkowe ziarna posiadały silnie zróznicowana orientacje. Niezależnie od orientacji poszczególnych ziaren, w obszarze makroskopowych pasm ścinania ich sieć krystaliczna rotuje w taki sposób, ze w każdym ziarnie jedna z płaszczyzn {111}zmierza do nałożenia się z płaszczyzną maksymalnych naprężeń ścinających. Umożliwia to propagacje poślizgu poprzez granice ziaren wzdłuż kierunku ścinania bez widocznej zmiany w kierunku poślizgu. Naturalna konsekwencja takiej rotacji jest uformowanie się specyficznej tekstury 'wnętrza' makroskopowych pasm ścinania.

Abstract

The crystal lattice rotations induced by shear bands formation have been examined in order to investigate the influence of grain boundaries on slip propagation and the resulting texture evolution. The issue was analysed on Al-0.23wt.% Zr alloy as a representative of face centered cubic metals with medium-to-high stacking fault energy. After solidification, the microstructure of the alloy was composed of flat, twin-oriented, large grains. The samples were cut-off from the as-cast ingot in such a way that the twinning planes were situated almost parallel to the compression plane. The samples were then deformed at 77K in channel-die up to strains of 0.69. To correlate the substructure with the slip patterns, the deformed specimens were examined by SEM equipped with a field emission gun and electron backscattered diffraction facilities. Microtexture measurements showed that strictly defined crystal lattice re-orientations occurred in the sample volumes situated within the area of the broad macroscopic shear bands (MSB), although the grains initially had quite different crystallographic orientations. Independently of the grain orientation, their crystal lattice rotated in such a way that one of the f111g slip planes became nearly parallel to the plane of maximum shear. This facilitates the slip propagation across the grain boundaries along the shear direction without any visible variation in the slip plane. A natural consequence of this rotation is the formation of specific MSB microtextures which facilitates slip propagation across grain boundaries.

Publikacje, które mogą Cię zainteresować

artykuł
#158820Data dodania: 14.4.2025
Crystal lattice rotations during shear band formation in pure titanium deformed at high strain rate / Sandra PUCHLERSKA, Henryk Paul, Seyed Mahmood Fatemi, Robert Chulist, Mariusz Prażmowski // Materials Characterization : an International Journal on Materials Structure and Behavior ; ISSN 1044-5803. — 2025 — vol. 222 art. no. 114867, s. 1–16. — Bibliogr. s. 15–16, Abstr. — Publikacja dostępna online od: 2025-02-21. — R. Chulist – afiliacja: Instytut Metalurgii i Inżynierii Materiałowej PAN, Kraków
artykuł
#52650Data dodania: 26.7.2010
Strain-stress conditions of shear band formation during CEC processing on a new machine with control back-pressure — Warunki odkształceniowo-naprężeniowe tworzenia pism ścinania w procesach CWS realizowanych na nowej maszynie z kontrolowanym przeciwciśnieniem / J. RICHERT // Archives of Metallurgy and Materials / Polish Academy of Sciences. Committee of Metallurgy. Institute of Metallurgy and Materials Science ; ISSN  1733-3490 . — 2010 — vol. 55 iss. 2, s. 391–408. — Bibliogr. s. 407–408