Szczegóły publikacji
Opis bibliograficzny
18k channels single photon counting readout circuit for hybrid pixel detector / P. MAJ, P. GRYBOŚ, R. SZCZYGIEŁ, M. ŻOŁĄDŹ, T. Sakumura, Y. Tsuji // Nuclear Instruments & Methods in Physics Research. Section A, Accelerators, spectrometers, detectors and associated equipment ; ISSN 0168-9002. — 2013 — vol. 697, s. 32–39. — Bibliogr. s. 39, Abstr.
Autorzy (6)
- AGHMaj Piotr
- AGHGryboś Paweł Leonard
- AGHSzczygieł Robert
- AGHŻołądź Mirosław
- Sakumura T.
- Tsuji Y.
Słowa kluczowe
Dane bibliometryczne
| ID BaDAP | 69425 |
|---|---|
| Data dodania do BaDAP | 2012-11-26 |
| Tekst źródłowy | URL |
| DOI | 10.1016/j.nima.2012.08.103 |
| Rok publikacji | 2013 |
| Typ publikacji | przegląd |
| Otwarty dostęp |  |
| Czasopismo/seria | Nuclear Instruments & Methods in Physics Research, Section A, Accelerators Spectrometers, Detectors and Associated Equipment |
Abstract
We have performed measurements of an integrated circuit named PXD18k designed for hybrid pixel semiconductor detectors used in X-ray imaging applications. The PXD18k integrated circuit, fabricated in CMOS 180 nm technology, has dimensions of 9.64 mm x 20 mm and contains approximately 26 million transistors. The core of the IC is a matrix of 96 x 192 pixels with 100 mu m x 100 um pixel size. Each pixel works in a single photon counting mode. A single pixel contains two charge sensitive amplifiers with Krummenacher feedback scheme, two shapers, two discriminators (with independent thresholds A and B) and two 16-bit ripple counters. The data are read out via eight low voltage differential signaling (LVDS) outputs with 100 Mbps rate. The power consumption is dominated by analog blocks and it is about 23 mu W/pixel. The effective peaking time at the discriminator input is 30 ns and is mainly determined by the time constants of the charge sensitive amplifier (CSA). The gain is equal to 42.5 mu V/e(-) and the equivalent noise charge is 168 e(-) rms (with bump-bonded silicon pixel detector). Thanks to the use of trim DACs in each pixel, the effective threshold spread at the discriminator input is only 1.79 mV. The dead time of the front end electronics for a standard setting is 172 ns (paralyzable model). In the standard readout mode (when the data collection time is separated from the time necessary to readout data from the chip) the PXD18k IC works with two energy thresholds per pixel. The PXD18k can also be operated in the continuous readout mode (with a zero dead time) where one can select the number of bits readout from each pixel to optimize the PXD18k frame rate. For example, for reading out 16 bits/pixel the frame rate is 2.7 kHz and for 4 bits/pixel it rises to 7.1 kHz. (c) 2012 Elsevier B.V. All rights reserved.
