Szczegóły publikacji
Opis bibliograficzny
Friction stir welding of aluminium 7136–T76511 extrusions / C. Hamilton, S. DYMEK, I. KALEMBA, M. BLICHARSKI // Science and Technology of Welding and Joining / Institute of Materials ; ISSN 1362-1718 . — 2008 — vol. 13 no. 8, s. 714–720. — Bibliogr. s. 720
Autorzy (4)
Słowa kluczowe
Dane bibliometryczne
| ID BaDAP | 42096 |
|---|---|
| Data dodania do BaDAP | 2008-12-12 |
| Tekst źródłowy | URL |
| DOI | 10.1179/136217108X365304 |
| Rok publikacji | 2008 |
| Typ publikacji | artykuł w czasopiśmie |
| Otwarty dostęp |  |
| Czasopismo/seria | Science and Technology of Welding and Joining |
Abstract
This research programme evaluates the as welded properties of Al 7136-T76511 extrusions joined through friction stir welding (FSW). Microstructural characterisation and mechanical testing were performed on the baseline material and on panels friction stir welded at 250 and 350 rev min -1 (all other weld parameters held constant). Transmission electron microscopy revealed the microstructural features in each of the unique weld regions and demonstrated that the precipitate density and morphology in these regions correlates with the temperature profile produced by the FSW process. A thermal model of FSW is developed that utilises an energy based scaling factor to account for tool slip. The slip factor is derived from an empirical relationship between the ratio of the maximum welding temperature to the solidus temperature and energy per unit length of weld. The thermal model successfully predicts the maximum welding temperatures and profiles over a range of energy levels. The mechanical behaviour after welding is correlated to the temperature distribution predicted by the model and to the observed microstructural characteristics. As welded mechanical properties of the alloy trended positively with the energy per unit length of weld, i.e. the highest joint efficiency was achieved at the highest welding temperature.
