Szczegóły publikacji

Opis bibliograficzny

Unreinforced and carbon fibre reinforced hydroxyapatite: resistance against microabrasion / Annett Dorner-Reisel, Karl Berroth, Rainer Neubauer, Klaus Nestler, Günter Marx, Magdalena Ścisło, Eberhard Müller, Anna ŚLÓSARCZYK // Journal of the European Ceramic Society ; ISSN 0955-2219. — Tytuł poprz.: International Journal of High Technology Ceramics. — 2004 — vol. 24 iss. 7, s. 2131–2139. — Bibliogr. s. 2139, Abstr.

Autorzy (8)

Słowa kluczowe

wear resistancebioceramicshydroxyapatiteinterfacescarbon fibrescompositesmicrostructure

Dane bibliometryczne

ID BaDAP35676
Data dodania do BaDAP2007-11-29
Tekst źródłowyURL
DOI10.1016/S0955-2219(03)00373-X
Rok publikacji2004
Typ publikacjiartykuł w czasopiśmie
Otwarty dostęptak
Czasopismo/seriaJournal of the European Ceramic Society

Abstract

Hot pressing (1000-1150 degreesC, 25 MPa, 15 min, argon atmosphere) was used to process unreinforced and carbon short fibre reinforced hydroxyapatite (20% fibre volume fraction). Due to the selected processing parameters, a fine grained crystalline calcium hydroxyapatite matrix without any decomposition products and a close contact between the slightly curved surface of the carbon fibres and the hydroxyapatite was realized. The nano- and microstructure of the hydroxyapatite and the composites is characterized by Fourier transformed infrared spectroscopy, Raman spectroscopy, X-ray diffraction and high resolution transmission electron microscopy. Ball-crater wear tests were performed with abrasive SiC particles to assess the sensitivity against microabrasion. The reinforcement of calcium hydroxyapatite with carbon short fibres enhances the resistance against microabrasion. An additional 60 nm thick pyrolytic carbon coating on the fibres further improves the wear resistance due to prevention of the crack formation, which can be induced by thermal expansion mismatch between reinforcement and matrix.

Publikacje, które mogą Cię zainteresować

artykuł
#4850Data dodania: 18.5.2001
Hot pressed hydroxyapatite-carbon fibre composites / Anna ŚLÓSARCZYK, Marian KLISCH, Marta BŁAŻEWICZ, Jan PIEKARCZYK, Ludosław STOBIERSKI, Alicja RAPACZ-KMITA // Journal of the European Ceramic Society ; ISSN 0955-2219. — Tytuł poprz.: International Journal of High Technology Ceramics. — 2000 — vol. 20 iss. 9, s. 1397–1402. — Bibliogr. s. 1402, Abstr.
artykuł
#150981Data dodania: 10.1.2024
Influence of wettability and initial metal composition on infiltration process of carbon refractory material: the evolutional model of molten metal infiltration into a 3D real microstructure acquired using X-ray computed tomography / Jakub STEC, Jacek TARASIUK, Sebastian WROŃSKI, Piotr MIGAS, Maciej GUBERNAT, Janusz Tomala, Robert FILIPEK // Journal of the European Ceramic Society ; ISSN 0955-2219. — Tytuł poprz.: International Journal of High Technology Ceramics. — 2024 — vol. 44 iss. 4, s. 2662–2676. — Bibliogr. s. 2675–2676, Abstr. — Publikacja dostępna online od: 2023-11-10