Szczegóły publikacji

Opis bibliograficzny

Characterisation and structure development of $Ni_{64}Cu_{9}Fe_{8}P_{19}$ glass forming alloy at elevated temperatures / K. Ziewiec, K. Bryła, A. Błachowski, K. Ruebenbauer, J. PRZEWOŹNIK // Journal of Alloys and Compounds ; ISSN 0925-8388. — 2007 — vol. 429 iss. 1–2, s. 133–139. — Bibliogr. s. 139, Abstr. — Publikacja dostępna online od: 2006-05-26

Autorzy (5)

Słowa kluczowe

metallic glassability to form glassmelt spinningcrystallisationthermal stability

Dane bibliometryczne

ID BaDAP34596
Data dodania do BaDAP2007-10-09
Tekst źródłowyURL
DOI10.1016/j.jallcom.2006.04.014
Rok publikacji2007
Typ publikacjiartykuł w czasopiśmie
Otwarty dostęptak
Czasopismo/seriaJournal of Alloys and Compounds

Abstract

Nickel-copper-iron-phosphorus Ni64Cu9Fe8P19 alloy was prepared using 99.95 wt.% Ni, 99.95 wt.% Cu, 99.95 wt.% Fe and the Ni-P master alloy. The precursors were melted in the arc furnace under argon gettered protective atmosphere. Then the alloy was induction melted in quartz tubes under vacuum (10(-2) bar) and quenched in water to obtain ingot of 10 mm diameter. The primary microstructure of the ingot was investigated by the use of light microscope. The Ni64Cu9Fe8P19 alloy was cast using melt spinning. The ribbon in the as cast state was characterised with use of transmission electron microscope (TEM) and X-ray diffraction (XRD). Differential thermal analysis (DTA) of the melt-spun ribbon was made to determine the thermal stability and glass forming ability of the alloy. The pieces of ribbon were heated to different temperatures and annealed during I h then characterised with use of the Mossbauer spectroscopy and the X-ray diffraction to see the change of the microstructure after heating to elevated temperatures. It has been found that the devitrification sequence consists of progressive formation of the (Ni, Fe, Cu)(3)P phase and (Ni, Fe, Cu)-FCC phase. The temperature range of the sequence is determined under isochronal conditions. (c) 2006 Elsevier B.V. All rights reserved.

Publikacje, które mogą Cię zainteresować

artykuł
#78836Data dodania: 14.1.2014
Structure of melt-spun $Fe-Cu-Si-B-Nb$ alloy / Tomasz KOZIEŁ, Jerzy Latuch, Sławomir KĄC // Journal of Alloys and Compounds ; ISSN 0925-8388. — 2014 — vol. 586 Suppl. 1, s. S121–S125. — Bibliogr. s. S124–S125, Abstr. — ISMANAM-2012 : International Symposium on Metastable, Amorphous and Nanostructure Materials : Moscow, 18 to 22 of June 2012
artykuł
#17169Data dodania: 1.9.2004
Glass forming ability and thermal stability of $Cu_{68.5}Ni_{12}P_{19.5}$ and $Cu_{66}Ni_{11.5}P_{22.5}$ melt spun ribbons / Krzysztof Ziewiec, Piotr Olszewski, Ryszard GAJERSKI, Andrzej MAŁECKI // Journal of Alloys and Compounds ; ISSN 0925-8388. — 2004 — vol. 373 iss. 1–2, s. 115–121. — Bibliogr. s. 120–121, Abstr.