Szczegóły publikacji

Opis bibliograficzny

The influence of foundry sand type on the hardening process of self-setting molding sands based on urea-furan binder / N. MATONIS, D. M. HALEJCIO, G. GOLĘBA // Archives of Foundry Engineering [Dokument elektroniczny]. — Czasopismo elektroniczne ; ISSN  2299-2944 . — Tytuł poprz.: Archiwum Odlewnictwa. — 2026 — vol. 26 no. 2, s. 49–62. — Wymagania systemowe: Adobe Reader. — Bibliogr. s. 61–62, Abstr. — Publikacja dostępna online od: 2026-06-26

Autorzy (3)

Słowa kluczowe

pH testultrasoundfoundry sandsself setting molding sands

Dane bibliometryczne

ID BaDAP169286
Data dodania do BaDAP2026-09-10
Tekst źródłowyURL
DOI10.24425/afe.2026.157989
Rok publikacji2026
Typ publikacjiartykuł w czasopiśmie
Otwarty dostęptak
Creative Commons
Czasopismo/seriaArchives of Foundry Engineering

Abstract

The article presents the results of investigations on the influence of the type of sand matrix on the binding process of self-setting molding sands with an organic binder. The study encompassed molding sands prepared on matrices of quartz, reclaimed quartz, zircon, chromite, corundum, synthetic, and olivine sand (a “non-compatible” sand). For the preparation of the molding sands, a urea–furan resin Kalthartz U404 was used as the binder, along with an acidic hardener, Activator 100 T3. In the case of matrices compatible with the self-setting molding sand system with an organic binder, the resin content was 1.00 p.p.w., with a constant hardener-to-binder ratio of 50 %. During the study, a sieve analysis of the investigated sand matrices was conducted according to PN-83/H-11076, and the pH value was determined using a method refined by the authors based on BN-81/4021-02. Fourier Transform Infrared (FTIR) spectroscopy was performed, along with kinetic studies of the sand binding process using the ultrasonic method, complemented by observations of the resulting binder bridges. During the ultrasonic tests, the influence of the applied sand matrix on the value of the obtained wave velocities (CL) and on the changes in the degree of sand hardening (Sx) during binding was determined. Additionally, the kinetics of the hardening process were determined based on dCL/dt and dSx/dt. All experiments were conducted on an ultrasonic testing station equipped with a temperature-controlled chamber, maintaining an ambient temperature of 20 °C throughout the measurements. Care was taken to ensure that the temperature of the molding sand after mixing all components remained at approximately 20 ± 1 °C.

Publikacje, które mogą Cię zainteresować

artykuł
#104893Data dodania: 5.4.2017
Influence of the hardener type on the hardening process kinetics of the selected self-setting sands / Ł. JAMROZOWICZ, J. KOLCZYK, N. KAŹNICA, Z. Pyziak // Archives of Foundry Engineering / Polish Academy of Sciences. Commission of Foundry Engineering ; ISSN 1897-3310. — Tytuł poprz.: Archiwum Odlewnictwa. — 2017 — vol. 17 no. 1, s. 73–78. — Bibliogr. s. 78, Abstr.
artykuł
#118425Data dodania: 19.12.2018
Influence of the reclaim addition into the matrix on the hardening process kinetics of the moulding sand with furfuryl resin / Ł. JAMROZOWICZ, J. KOLCZYK, P. WOJTUŃ // Archives of Foundry Engineering / Polish Academy of Sciences. Commission of Foundry Engineering ; ISSN 1897-3310. — Tytuł poprz.: Archiwum Odlewnictwa. — 2018 — vol. 18 iss. 1, s. 41–46. — Bibliogr. s. 46, Abstr.