Szczegóły publikacji
Opis bibliograficzny
Stir zone microstructure development in the AA5083–AA7075 friction stir welds depending on tool geometry / I. KALEMBA-REC, C. Hamilton, M. WRÓBEL, M. KOPYŚCIAŃSKI, A. ZIĘBA // W: FSWP 2025 [Dokument elektroniczny] : conference on Friction Stir Welding and Processing : Coimbra, Portugal, 11–13 June 2025 : proceedings / eds. Carlos Leitão [et al.]. — Wersja do Windows. — Dane tekstowe. — [Coimbra : University of Coimbra], [2025]. — S. 29–31. — Wymagania systemowe: Adobe Reader. — Tryb dostępu: https://drive.google.com/file/d/1jJqIQWTV_adR-3ZlK0TtwQXbnruj... [2026-07-15]. — Bibliogr. s. 31, Abstr.
Autorzy (5)
Słowa kluczowe
Dane bibliometryczne
| ID BaDAP | 169071 |
|---|---|
| Data dodania do BaDAP | 2026-09-01 |
| Rok publikacji | 2025 |
| Typ publikacji | materiały konferencyjne (aut.) |
| Otwarty dostęp |  |
Abstract
This research focuses on the microstructural and mechanical characterization of the 5083-7075 friction stir welds, with emphasis on the impact of tool geometry. The applied tools were consisted of a spiral shoulder and three different pin geometries: threaded taper, Whorl and Triflute. For the specified FSW parameters, all pins successfully produced defect-free welds with satisfactory quality and properties. Pin geometry significantly affected the material intermixing, the size of the weld area, and weld strength. The Whorl pin facilitated the most consistent and accurate material mixing, while the joint produced with the Triflute pin exhibited the highest tensile strength.
