Szczegóły publikacji
Opis bibliograficzny
Large-scale wire arc additive manufacturing of duplex stainless steel: comprehensive insights into microstructure and mechanical behavior / Vishal Mahey, Grant A. Johnson, Prayag Burad, Robert CHULIST, Peter C. Collins, Sougata Roy // Materials Science and Engineering . A, Structural Materials: Properties, Microstructure and Processing ; ISSN 0921-5093. — 2026 — vol. 963 art. no. 150232, s. 1-19. — Bibliogr. s. 17-19, Abstr. — Publikacja dostępna online od: 2026-04-10
Autorzy (6)
- Mahey Vishal
- Johnson Grant A.
- Burad Prayag
- AGHChulist Robert
- Collins Peter C.
- Roy Sougata
Słowa kluczowe
Dane bibliometryczne
| ID BaDAP | 167215 |
|---|---|
| Data dodania do BaDAP | 2026-05-21 |
| Tekst źródłowy | URL |
| DOI | 10.1016/j.msea.2026.150232 |
| Rok publikacji | 2026 |
| Typ publikacji | artykuł w czasopiśmie |
| Otwarty dostęp |  |
| Czasopismo/seria | Materials Science and Engineering, A, Structural Materials: Properties, Microstructure and Processing |
Abstract
In the present study, large-scale Wire Arc Additive Manufacturing (WAAM) of duplex stainless steel (DSS) 2209 was investigated. The research seeks to understand microstructural evolution, mechanical properties, and phase distributions along the scanning and build directions. The results demonstrated remarkable uniformity in microstructure and microhardness properties across the build height (top, middle, and bottom regions) and scan direction (edge and central regions), with notable deviations observed in the near-substrate region. The observed uniformity is attributed to optimized process conditions, interlayer reheating during successive depositions, and controlled interlayer temperature. Edge samples exhibited slightly higher porosity than central samples; however, porosity remained consistent along the build height. The near-substrate region displayed increased porosity and finer grains compared to the rest of the wall. EBSD analysis revealed austenite phase content to be uniform across the build height and scan direction, aside from the near-substrate region, which showed higher austenite content. The microhardness values were consistent across the wall, except for the near-substrate region, where a lower hardness was observed due to the higher austenite content in that region. Tensile testing indicated higher strength and lower ductility in horizontal samples compared to vertical samples, with no significant differences along the build height, highlighting the role of sample orientation in mechanical properties. While the overall microstructure and properties exhibited macroscopic uniformity, higher magnification analysis revealed localized variations in austenite morphology between edge and central regions, although the differences did not result in substantial property variations. The observed uniformity in structure and properties, with variations confined to the initial near-substrate region, highlights the potential and reliability of the WAAM process for fabricating large-scale DSS components with minimal variability, making it suitable for industrial-scale applications.
