Szczegóły publikacji
Opis bibliograficzny
Protective coatings for mining conical picks considering rock strength and rock abrasivity / Kamil MUCHA, Andrzej N. Wieczorek // Coatings [Dokument elektroniczny]. — Czasopismo elektroniczne ; ISSN 2079-6412. — 2025 — vol. 15 iss. 6 art. no. 637, s. 1-14. — Wymagania systemowe: Adobe Reader. — Bibliogr. s. 13-14, Abstr. — Publikacja dostępna online od: 2025-05-25
Autorzy (2)
- AGHMucha Kamil
- Wieczorek Andrzej
Słowa kluczowe
Dane bibliometryczne
| ID BaDAP | 160037 |
|---|---|
| Data dodania do BaDAP | 2025-06-09 |
| Tekst źródłowy | URL |
| DOI | 10.3390/coatings15060637 |
| Rok publikacji | 2025 |
| Typ publikacji | artykuł w czasopiśmie |
| Otwarty dostęp |  |
| Creative Commons | |
| Czasopismo/seria | Coatings |
Abstract
The selection of mining cutting tools used on the cutting heads of roadheaders and shearers in hard coal mines is primarily based on the uniaxial compressive strength (UCS) of the rock. However, selecting cutting tools solely on the basis of a single parameter characterizing the rock has proven to be insufficient. Therefore, the aim of the presented study was to develop guidelines for the selection of cutting tools with appropriate protective coatings on the working parts, based not only on the mechanical strength properties of rocks, but also on their abrasivity. For the study, twelve rock samples were collected from five different Polish hard coal mines. For each rock type, the UCS (uniaxial compressive strength), BTS (Brazilian tensile strength), and chemical composition (determined using wavelength-dispersive X-ray fluorescence, WD-XRF) were measured, along with the rock abrasivity index Wz, determined using a proprietary method developed at the AGH University of Krakow. The test results were compared with the calculated specific pick wear, defined as the number of picks consumed (replaced) per 1000 m3 of excavated material. As a result, a classification of rocks based on their UCS and abrasivity was developed, along with recommendations for selecting conical picks with suitable protective coatings on the working parts.
