Szczegóły publikacji
Opis bibliograficzny
Development and tests of the novel configuration of the solar chimney with sensible heat storage / Krzysztof SORNEK, Rafał FIGAJ, Karolina PAPIS-FRĄCZEK // Applied Thermal Engineering ; ISSN 1359-4311. — 2025 — vol. 258 pt. A art. no. 124515, s. 1–15. — Bibliogr. s. 14–15, Abstr. — Publikacja dostępna online od: 2024-10-01
Autorzy (3)
Słowa kluczowe
Dane bibliometryczne
| ID BaDAP | 155934 |
|---|---|
| Data dodania do BaDAP | 2024-11-05 |
| Tekst źródłowy | URL |
| DOI | 10.1016/j.applthermaleng.2024.124515 |
| Rok publikacji | 2025 |
| Typ publikacji | artykuł w czasopiśmie |
| Otwarty dostęp |  |
| Creative Commons | |
| Czasopismo/seria | Applied Thermal Engineering |
Abstract
Heating, ventilation, and air conditioning systems account for a significant part of the energy usage in buildings and are primarily responsible for greenhouse gas emissions and operating costs. These can be lowered by the adoption of solar energy. This paper presents the developing and testing of a novel solar chimney with sensible heat storage. The thermal performance and potential contribution of the developed thermal chimney to decreasing residential buildings energy consumption in Polish climate conditions is investigated. The developed solar air chimney is composed of a novel accumulation material that allows for sensible heat storage. Solar radiation can heat the accumulation layer during the day and the stored energy can be used to preheat the ventilation air. The prototype of the solar chimney was tested in laboratory conditions using a dedicated experimental rig. Furthermore, numerical calculations were performed using TRNSYS software, where a validated dynamic numerical model was developed to simulate the performance of the device. The results show that airflow direction, volume, and the number of heated walls significantly impact the power transferred from the solar chimney walls to the air. The maximum power transferred from the solar chimney walls to the air per unit of surface varied from 360.2 W/m2 (when all walls were heated) to 672.4 W/m2 (when only one wall was heated). The validated model underestimates the outlet air temperature of the solar chimney by a maximum of 0.39 °C on average basis and shows that the increase of air temperature between −10 and 20 °C at 1000 W/m2 determines a decrease of 12.5 % of the thermal output. The obtained results allow one to highlight that the proposed solution can be considered as a replacement for typical brick chimneys located on roofs or as a thermal storage wall.
