Szczegóły publikacji

Opis bibliograficzny

In vitro and in vivo degradation of the new dissolvable surgical wire, produced from Zn based low alloy by hot and cold drawing / A. MILENIN, P. KUSTRA, U. LELEK-BORKOWSKA, M. WRÓBEL, M. MARZEC, J. Sulej-Chojnacka, J. Półrolniczak, I. Polkowska, B. Nowicka // Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials ; ISSN 1073-5623. — 2024 — vol. 55 iss. 9, s. 3434–3449. — Bibliogr. s. 3447–3449, Abstr. — Publikacja dostępna online od: 2024-07-01

Autorzy (9)

Dane bibliometryczne

ID BaDAP154947
Data dodania do BaDAP2024-09-19
Tekst źródłowyURL
DOI10.1007/s11661-024-07470-0
Rok publikacji2024
Typ publikacjiartykuł w czasopiśmie
Otwarty dostęptak
Creative Commons
Czasopismo/seriaMetallurgical and Materials Transactions, A, Physical Metallurgy and Materials Science

Abstract

The biocorrosion of a new surgical wire (0.6, 0.8, and 1.0 mm in diameter) obtained from a ZnMg0.004 alloy by hot and cold drawing was characterized using in vitro tests in a bovine animal serum solution and in vivo tests – through placement in the muscles of a rabbit and a in cat's broken paw. Corrosion gravimetric tests were carried out in a corrosive environment refreshed every 3 days and also one which remained unchanged throughout the test period. Electrochemical tests were performed in the same solution of serum as in gravimetric tests. Depending on the initial diameter, complete dissolution of the wire was observed after 36-78 days of immersion in periodically changed serum solution. None of the wires completely dissolved over 120 days in the unreplaced serum solution. The corrosion rate values determined in electrochemical and gravimetric tests were similar. After 90 days of in vivo tests, both in the body of the rabbit and the cat, the degradation of the wire was similar to in vitro tests in the unreplaced serum solution. No harmful effects were observed in the animals. © The Author(s) 2024.

Publikacje, które mogą Cię zainteresować

artykuł
#128740Data dodania: 26.6.2020
A novel high-strength $Zn-3Ag-0.5Mg$ alloy processed by hot extrusion, cold rolling, or high-pressure torsion / Maria WĄTROBA, Wiktor BEDNARCZYK, Jakub KAWAŁKO, Sebastian LECH, Krzysztof Wieczerzak, Terence G. Langdon, Piotr BAŁA // Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials ; ISSN 1073-5623. — 2020 — vol. 51 iss. 7, s. 3335–3348. — Bibliogr. s. 3347–3348. — Publikacja dostępna online od: 2020-05-09. — K. Wieczerzak - afiliacja: Laboratory for Mechanics of Materials and Nanostructures, Empa, Swiss Federal Laboratories for Materials Science and Technology; P. Bała – dod. afiliacja: ACMiN AGH
artykuł
#153164Data dodania: 31.5.2024
Mg-Ca surgical wires degradation in animal serum / Urszula LELEK-BORKOWSKA, Mirosław WRÓBEL, Mateusz MARZEC, Piotr KUSTRA, Andrij MILENIN // Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials ; ISSN 1073-5623. — 2024 — vol. 55 iss. 6, s. 2141–2152. — Bibliogr. s. 2151-2152, Abstr. — Publikacja dostępna online od: 2024-04-01