Szczegóły publikacji
Opis bibliograficzny
The numerical fatigue life analysis of a conformal HPDC mould core additively manufactured from maraging steel / Jarosław PIEKŁO, Aldona GARBACZ-KLEMPKA, Andriy BURBELKO // Materials [Dokument elektroniczny]. — Czasopismo elektroniczne ; ISSN 1996-1944. — 2023 — vol. 16 iss. 1 art. no. 365, s. 1–19. — Wymagania systemowe: Adobe Reader. — Bibliogr. s. 18–19, Abstr. — Publikacja dostępna online od: 2022-12-30
Autorzy (3)
Słowa kluczowe
Dane bibliometryczne
| ID BaDAP | 144542 |
|---|---|
| Data dodania do BaDAP | 2023-01-20 |
| Tekst źródłowy | URL |
| DOI | 10.3390/ma16010365 |
| Rok publikacji | 2023 |
| Typ publikacji | artykuł w czasopiśmie |
| Otwarty dostęp |  |
| Creative Commons | |
| Czasopismo/seria | Materials |
Abstract
This paper presents the results of a stress analysis and fatigue life calculation of an HPDC mould core. The calculations were performed using Abaqus and fe-safe software. The numerical model of a core cooled by a conformal channel was based on an existing and working counterpart made of additively manufactured high-strength 1.2709 maraging steel. This study shows that the conformal channel results in a lower average core temperature as compared to the temperature of the same core shape cooled by the conventional method. The course of the stress changes during the mould cycle was also determined. It was found that stresses on the core surface caused the cyclic compression and tension of the material. The necessary strength tests of 1.2709 steel produced by selective laser melting (SLM) within a temperature range of 25 to 550 °C, which were necessary to define the fatigue coefficients by the Seeger approximation method, were also carried out in this study, along with metallographic tests of the fractures of the specimens. Based on the multiaxial fatigue criterion and using the maximum principal deformation hypothesis, the fatigue life of the core and channel surfaces was determined. Based on the calculations, it was shown that crack initiation on the channel surface can occur earlier than on the outer surface of the core.
