Szczegóły publikacji
Opis bibliograficzny
CFD analysis of elements of an adsorption chiller with desalination function / Karol SZTEKLER, Tomasz SIWEK, Wojciech KALAWA, Łukasz LIS, Łukasz MIKA, Ewelina RADOMSKA, Wojciech NOWAK // W: Adsorption desalination and cooling systems: advances in design, modeling and performance / eds. Jaroslaw Krzywanski, Norbert Skoczylas, Marcin Sosnowski. — Basel : MDPI, cop. 2022. — N. Skoczylas - afiliacja: The Strata Mechanics Research Institute of the Polish Academy of Sciences. — ISBN: 978-3-0365-5913-1; e-ISBN: 978-3-0365-5914-8. — S. 215–233. — Bibliogr. s. 232–233, Abstr. — Reprinted from: Energies 2021, 14, 7804, doi.org/10.3390/en14227804
Autorzy (7)
Słowa kluczowe
Dane bibliometryczne
| ID BaDAP | 143943 |
|---|---|
| Data dodania do BaDAP | 2022-12-21 |
| Tekst źródłowy | URL |
| Rok publikacji | 2022 |
| Typ publikacji | fragment książki |
| Otwarty dostęp |  |
| Creative Commons |
Abstract
This paper presents the results of numerical tests on the elements of an adsorption chiller that comprises a sorption chamber with a bed, a condenser, and an evaporator. The simulation is based on the data and geometry of a prototype refrigeration appliance. The simulation of this problem is unique and has not yet been performed, and so far, no simulation of the phenomena occurring in the systems on a real scale has been carried out. The presented results are part of the research covering the entire spectrum of designing an adsorption chiller. The full process of numerical modeling of thermal and flow phenomena taking place in the abovementioned components is presented. The computational mesh sensitivity analysis combined in the k-ε turbulence model was performed. To verify and validate the numerical results obtained, they were compared with the results of tests carried out on a laboratory stand at the AGH Center of Energy. The results of numerical calculations are in good agreement with the results of the experimental tests. The maximum deviation between the pressure obtained experimentally and by simulations is 1.8%, while for temperatures this deviation is no more than 0.5%. The results allow the identification of problems and their sources, which allows for future structural modifications to optimize the operation of the device.
