Szczegóły publikacji
Opis bibliograficzny
Characterization of microstructure and selected properties of $SnSbCu$ alloy after FSP / Joanna HRABIA-WIŚNIOS, Beata LESZCZYŃSKA-MADEJ, Marcin MADEJ, Aleksandra Węglowska // International Journal of Advanced Manufacturing Technology ; ISSN 0268-3768. — 2021 — vol. 117 iss. 1, s. 469–479. — Bibliogr. s. 479, Abstr. — Publikacja dostępna online od: 2021-07-30
Autorzy (4)
- AGHHrabia-Wiśnios Joanna
- AGHLeszczyńska-Madej Beata
- AGHMadej Marcin
- Węglowska Aleksandra
Słowa kluczowe
Dane bibliometryczne
| ID BaDAP | 136916 |
|---|---|
| Data dodania do BaDAP | 2021-10-12 |
| Tekst źródłowy | URL |
| DOI | 10.1007/s00170-021-07781-1 |
| Rok publikacji | 2021 |
| Typ publikacji | artykuł w czasopiśmie |
| Otwarty dostęp |  |
| Creative Commons | |
| Czasopismo/seria | International Journal of Advanced Manufacturing Technology |
Abstract
The paper presents the results of research on the microstructure and selected mechanical properties of the SnSbCu-bearing alloy after friction stir processing (FSP). The Whorl tool was used for modification; the process was carried out using two rotational speeds of the tool: 280 and 450 RPM and a constant linear speed of 355 mm/min. Microstructure studies were performed employing the techniques of light microscopy and scanning electron microscopy along with analysis of the chemical composition of micro-areas. Additionally, the phase composition was investigated by means of the X-ray diffraction method and statistical analysis of the precipitates present in the investigated alloy. In addition, hardness, flexural strength, and uniaxial compression tests were performed before and after FSP modification. It was proved that using FSP to modify the SnSbCu alloy promotes refinement and homogenization of the microstructure, as well as improvement of the flexural strength, whereas no changes in the hardness level were found.