Szczegóły publikacji

Opis bibliograficzny

The kinetics of phase transformations during continuous cooling of $Ti13Nb13Zr$ alloy — Kinetyka przemian fazowych zachodzących podczas ciągłego chłodzenia stopu $Ti13Nb13Zr$ / Robert DĄBROWSKI // Inżynieria Materiałowa ; ISSN 0208-6247. — 2020 — R. 41 nr 1, s. 3–9. — Bibliogr. s. 9

Autor

Słowa kluczowe

EN: CCT diagramtitanium alloymicrostructurephase transformations
PL: stop tytanumikrostrukturaprzemiany fazowewykres CTPc

Dane bibliometryczne

ID BaDAP129658
Data dodania do BaDAP2020-07-30
DOI10.15199/28.2020.1.1
Rok publikacji2020
Typ publikacjiartykuł w czasopiśmie
Otwarty dostęptak
Czasopismo/seriaIM Inżynieria Materiałowa = Materials Engineering

Abstract

The phase transformations during continuous cooling from the single phase β range in the Ti13Nb13Zr alloy have been analysed. Investigations were carried out by the dilatometric method using L78 R.I.T.A. dilatometer of the LINSEIS Company. The received results have been illustrated by selected dilatometric curves ΔL = f(T), (where: ΔL is the length change of the sample, T – temperature). On the basis of the curves, the temperature at which diffusion and non-diffusion transformations start and finish has been determined. The cooling curves was differentiated ΔL/T = f(T). Additionally, changes in the alloy microstructure during cooling down from the single phase β range have been analysed. After cooling from 780°C the diffusion martensitic transformation β → α” and probably massive transformation β → αM occur in the alloy cooling rate range from 160–10°C/s. It has been found that in the range of 5–0.05°C/s of the applied cooling rate, a diffusion β → α + β transformation is observed. Besides microstructure changes, dilatometric effects were also observed which corroborates the occurrence of phase transformation in the alloy. The obtained results may serve for the interpretation of phase transformations occurring in the Ti13Nb13Zr alloy during aging.

Streszczenie

Celem pracy była ocena kinetyki przemian fazowych zachodzących podczas ciągłego chłodzenia z różną szybkością stopu Ti13Nb13Zr z jednofazowego zakresu β. Na podstawie krzywych dylatometrycznych określono temperaturę, w której rozpoczynają się i kończą transformacje dyfuzyjne i niedyfuzyjne. Stwierdzono, że w zakresie zastosowanej szybkości chłodzenia (5–0,05°C/s) obserwuje się transformację dyfuzyjną β → α + β. Oprócz zmian mikrostruktury zaobserwowano również efekty dylatometryczne, które potwierdzają występowanie przemiany fazowej w stopie. Uzyskane wyniki mogą służyć do interpretacji przemian fazowych zachodzących w stopie Ti13Nb13Zr podczas starzenia.

Publikacje, które mogą Cię zainteresować

artykuł
#127274Data dodania: 29.1.2020
Analysis of phase transformations in the austenite range for continuous cooling of 38CrSiMo4-2-3 steel — Analiza przemian fazowych z zakresu austenitu przy ciągłym chłodzeniu stali 38CrSiMo4-2-3 / Edyta ROŻNIATA // Inżynieria Materiałowa ; ISSN 0208-6247. — 2019 — R. 40 nr 6, s. 128–132. — Bibliogr. s. 131, [Abstr., Streszcz.]
artykuł
#80502Data dodania: 11.3.2014
Przemiany fazowe w stopie Ti6Al7Nb przy chłodzeniu ciągłym z zakresu jednofazowego $\beta$ — The phase transformations during continuous cooling of Ti6Al7Nb alloy from the single phase $\beta$ range / Robert DĄBROWSKI // Inżynieria Materiałowa ; ISSN 0208-6247. — 2014 — R. 35 nr 1, s. 35–38. — Bibliogr. s. 38, Streszcz., Abstr.