Szczegóły publikacji

Opis bibliograficzny

Creating the structure and properties of 7075 alloy casts by thermal and forming processes / Krzysztof Majerski, Anna Dziubińska, Grzegorz Winiarski, Michał SZUCKI, Krzysztof Drozdowski // Advances in Science and Technology Research Journal [Dokument elektroniczny]. — Czasopismo elektroniczne ; ISSN 2299-8624. — 2019 — vol. 13 iss. 4, s. 15–21. — Wymagania systemowe: Adobe Reader. — Bibliogr. s. 21, Abstr. — Publikacja dostępna online od: 2019-12-01

Autorzy (5)

  • Majerski Krzysztof
  • Dziubińska Anna
  • Winiarski Grzegorz
  • AGHSzucki Michał
  • Drozdowski Krzysztof

Słowa kluczowe

microstructureheat treatmentaluminium alloysmetal forming

Dane bibliometryczne

ID BaDAP127199
Data dodania do BaDAP2020-01-30
Tekst źródłowyURL
DOI10.12913/22998624/112361
Rok publikacji2019
Typ publikacjiartykuł w czasopiśmie
Otwarty dostęptak
Creative Commons
Czasopismo/seriaPostępy Nauki i Techniki

Abstract

In this paper, the hot formability of 7075 aluminum alloy sand and permanent casting ingots were verified. The experiment was carried out by using casting, heat treatment (homogenization) of ingots and conducting isothermal compression tests at temperatures of 420-500 degrees C. The effect of the forming temperature on the microstructure, the tendency for crack formation and hardness were determined. The results show that ingots in the as-cast state have a dendritic network structure rich in the second phase precipitation on the grain boundaries. After the homogenization process, the microstructure is significantly more balanced. The forming process at 420-480 degrees C of sand casts leads to significant grain elongation and crack formation, mainly at the grain boundaries. Raising the forming temperature to 480-500 degrees C leads to a reduction in the occurrence of cracks. On the other hand, permanent mold castings do not reveal cracks during deformation in the temperature range 420-480 degrees C.

Publikacje, które mogą Cię zainteresować

artykuł
#119515Data dodania: 30.1.2019
Investigation of the deformability of aluminium-copper casting alloys / Grzegorz Winiarski, Anna Dziubińska, Krzysztof Majerski, Michał SZUCKI, Krzysztof Drozdowski // Advances in Science and Technology Research Journal [Dokument elektroniczny]. — Czasopismo elektroniczne ; ISSN 2299-8624. — 2018 — vol. 12 iss. 3, s. 242–249. — Wymagania systemowe: Adobe Reader. — Bibliogr. s. 249, Abstr. — Publikacja dostępna online od: 2018-09-01
artykuł
#143857Data dodania: 13.12.2022
Case study on the influence of forming parameters on complex shape part deformation / Paweł BAŁON, Bartłomiej KIEŁBASA, Łukasz KOWALSKI, Robert Smusz // Advances in Science and Technology Research Journal [Dokument elektroniczny]. — Czasopismo elektroniczne ; ISSN 2299-8624. — 2022 — vol. 16 iss. 6, s. 204–213. — Wymagania systemowe: Adobe Reader. — Bibliogr. s. 212–213, Abstr. — Publikacja dostępna online od: 2022-12-01