Szczegóły publikacji
Opis bibliograficzny
Effect of sintering temperature on microstructure and selected properties of spark plasma sintered Al-SiC composites / Beata LESZCZYŃSKA-MADEJ, Dariusz Garbiec, Marcin MADEJ // Vacuum : Surface Engineering, Surface Instrumentation & Vacuum Technology ; ISSN 0042-207X. — 2019 — vol. 164, s. 250–255. — Bibliogr. s. 254–255, Abstr. — Publikacja dostępna online od: 2019-03-19
Autorzy (3)
- AGHLeszczyńska-Madej Beata
- Garbiec Dariusz
- AGHMadej Marcin
Słowa kluczowe
Dane bibliometryczne
| ID BaDAP | 121042 |
|---|---|
| Data dodania do BaDAP | 2019-04-17 |
| Tekst źródłowy | URL |
| DOI | 10.1016/j.vacuum.2019.03.033 |
| Rok publikacji | 2019 |
| Typ publikacji | artykuł w czasopiśmie |
| Otwarty dostęp |  |
| Czasopismo/seria | Vacuum |
Abstract
The paper presents the results of study of microstructure and selected properties of spark plasma sintered Al matrix composites reinforced with 2 μm SiC particles. Composites with contents of 10, 20 and 30 wt % SiC were prepared. The sintering process was carried out by means of an HP D 25–3 furnace, using two sintering temperatures: 580 °C and 600 °C. As the reference material, pure Al was sintered under the same conditions. Composites with a near full density of 97–99% were obtained. The test results did not show a remarkable difference in the microstructure of the composites reinforced with SiC particles sintered at 580 °C and 600 °C. The microstructure of the sintered compacts consists of uniform grains, the SiC strengthening phase particles locate on the grain boundaries. The use of a higher sintering temperature had a positive effect on hardness and the bending strength of the tested materials. © 2019 Elsevier Ltd.
