Szczegóły publikacji
Opis bibliograficzny
Reasearch of H-section beams straightening process / DZIEDZIC Michał, TURCZYN Stanisław, KUŹMIŃSKI Zbigniew, Michałowski Mirosław // W: METAL 2018 : 27th international conference on Metallurgy and materials : May 23rd – 25th 2018, Brno, Czech Republic : abstracts. — Ostrava : TANGER Ltd., cop. 2018. — ISBN: 978-80-87294-83-3. — S. 47-48. — Pełny tekst W: METAL 2018 [Dokument elektroniczny] : 27th international conference on Metallurgy and materials : May 23rd–25th 2018, Brno : conference proceedings : reviewed version. — Dane tekstowe. – Wersja do Windows. — Ostrava : TANGER Ltd., cop. 2018. — 1 dysk optyczny. — S. 279–284. — Wymagania systemowe: Adobe Reader ; napęd CD-ROM. — Bibliogr. s. 284, Abstr. — ISBN 978-80-87294-84-0
Autorzy (4)
- AGHDziedzic Michał
- AGHTurczyn Stanisław
- AGHKuźmiński Zbigniew
- Michałowski Mirosław
Słowa kluczowe
Dane bibliometryczne
ID BaDAP | 114082 |
---|---|
Data dodania do BaDAP | 2018-06-07 |
Tekst źródłowy | URL |
Rok publikacji | 2018 |
Typ publikacji | materiały konferencyjne (aut.) |
Otwarty dostęp | |
Konferencja | 27th international conference on Metallurgy and materials |
Abstract
One of the most important causes of steel sections failures are the residual stresses. They are those stresses that are locked in the profiles without of application of any service or internal loads. They influence the material properties of rolled materials and as a consequence the propagation of cracks. Based on the received results, three dimensional finite element analysis of the roller straightening process of chosen H-section was found to be promising for the designing of optimal setting of each roll. Three dimensional finite element modelling of the roller straightening process of H-section beams is presented in the paper. An explicit-dynamic method by using ABAQUS solver was adopted to realize the feeding of H-sections into the intermeshed rolls by rotating the upper rolls and to accomplish the calculation under condition of frequent contact between H-section and roll interface. Realistic kinematic boundary conditions are implemented in the research; the longitudinal movement of the product through straightening machine achieved by the rollers and the friction. For the constitutive equation of the material, elastic-plastic hardening low was used. The effect of the roll gap on the straightness of the chosen H-section after straightening process was examined. Equivalent stresses, strains, forces and torques parameters were calculated as well. Well known global effects eg. increasing of the web height, flapping of the H-section towards rollers occurs in the research as well. The residual stress can be reduced by reasonable straightening process and it contributes to improving the quality and secure life of H-sections. © 2018 TANGER Ltd., Ostrava.