Szczegóły publikacji
Opis bibliograficzny
The structure and mechanical properties of $Ni-Mo$ PM steels with addition of $Mn$ and $Cu$ / E. LICHAŃSKA, P. KULECKI, K. PAŃCIKIEWICZ // Powder Metallurgy Progress : Journal of Science and Technology of Particle Materials ; ISSN 1335-8987. — 2017 — vol. 17 iss. 1, s. 37–46. — Bibliogr. s. 45–46, Abstr. — Publikacja dostępna online od: 2017-12-21
Autorzy (3)
Słowa kluczowe
Dane bibliometryczne
| ID BaDAP | 113713 |
|---|---|
| Data dodania do BaDAP | 2018-05-15 |
| Tekst źródłowy | URL |
| DOI | 10.1515/pmp-2017-0005 |
| Rok publikacji | 2017 |
| Typ publikacji | artykuł w czasopiśmie |
| Otwarty dostęp |  |
| Creative Commons | |
| Czasopismo/seria | Powder Metallurgy Progress |
Abstract
The aim of the study was to evaluate the effect of chemical composition on the structure and mechanical properties of Mn-Ni-Mo and Ni-Mo-Cu PM steels. Pre-alloyed powder Astaloy 85Mo, diffusion alloyed powders Distaloy AQ and Distaloy AB produced by Höganäs, low carbon ferromanganese, carbonyl nickel powder T255 with three-dimensional filamentary structure and graphite CU-F have been used as the basic powders. Three mixtures with compositions of Fe-1%Mn-(0.5/1.75)%Ni-(0.5/0.85)%Mo-0.8%C and Fe-1.75%Ni-0.5%Mo-1.5%Cu-0.8%C were prepared in a Turbula mixer. Green compacts were single pressed in a steel die at 660 MPa according to PN-EN ISO 2740 standard. Sinterhardening was carried out at 1250°C in a mixture of 95% N2+5% H2 for 60 minutes. Mechanical tests (tensile, bend, hardness) and microstructural investigations were performed. Additionally, XRD and EDS analysis, fractographic investigations were carried out. The microstructures of steels investigated were mainly bainitic or bainitic-martensitic. Addition 1% Mn to Distaloy AQ based steel caused increase of tensile properties (YS from 422 to 489 MPa, UTS from 522 to 638 MPa, TRS from 901 to 1096 MPa) and decrease of plasticity (elongation from 3.65 to 2.84%).
