Szczegóły publikacji
Opis bibliograficzny
Characteristics of the $NiAl/Ni_3Al$ matrix composite with $TiB_2$ particles fabricated by high pressure - high temperature sintering / P. Hyjek, I. Sulima, L. JAWORSKA // Archives of Metallurgy and Materials / Polish Academy of Sciences. Committee of Metallurgy. Institute of Metallurgy and Materials Science ; ISSN 1733-3490. — 2017 — vol. 62 iss. 3, s. 1511-1520. — Bibliogr. s. 1519–1520
Autorzy (3)
- Hyjek Paweł
- Sulima Iwona
- AGHJaworska Lucyna Renata
Słowa kluczowe
Dane bibliometryczne
ID BaDAP | 111185 |
---|---|
Data dodania do BaDAP | 2018-01-13 |
Tekst źródłowy | URL |
DOI | 10.1515/amm-2017-0234 |
Rok publikacji | 2017 |
Typ publikacji | artykuł w czasopiśmie |
Otwarty dostęp | |
Creative Commons | |
Czasopismo/seria | Archives of Metallurgy and Materials |
Abstract
The article presents the results of tests carried out on the manufactured composite materials based on a two-phase NiAl/Ni<sub>3</sub>Al matrix, which was enriched with the addition of TiB<sub>2</sub> ceramic particles added in an amount of 4 and 7 vol%. The resulting mixtures were sintered by the High Pressure High Temperature (HP-HT) process. The results were compared to the results obtained for the sole matrix material produced under the same conditions. It has been shown that, at a lower density, the addition of reinforcing particles increases the composite hardness, Young’s modulus and resistance to frictional wear. However, higher addition of TiB<sub>2</sub> (7 vol%) was observed to yield less satisfactory results, and despite higher hardness and lower density caused a decrease in other properties tested. The produced materials were characterized by a compact and highly differentiated microstructure free from any noticeable cracks and pores.