Szczegóły publikacji

Opis bibliograficzny

Structure and properties of titanium produced by a new method of chip recycling / Krzysztof Topolski, Włodzimierz BOCHNIAK, Marek ŁAGODA, Paweł OSTACHOWSKI, Halina Garbacz // Journal of Materials Processing Technology ; ISSN 0924-0136. — 2017 — vol. 248, s. 80–91. — Bibliogr. s. 91, Abstr. — Publikacja dostępna online od: 2017-05-13

Autorzy (5)

Słowa kluczowe

titaniumchipsKOBO methodrecycling

Dane bibliometryczne

ID BaDAP105995
Data dodania do BaDAP2017-06-22
Tekst źródłowyURL
DOI10.1016/j.jmatprotec.2017.05.005
Rok publikacji2017
Typ publikacjiartykuł w czasopiśmie
Otwarty dostęptak
Czasopismo/seriaJournal of Materials Processing Technology

Abstract

The paper proposes a new technique of recycling metallic chips and presents the results of examination of the products thus obtained. The aim of the experiments was to recycle commercial purity (cp) titanium Grade 2 chips obtained by turning, and to produce a solid bulk material. The recycling was realized using a plastic working process. The titanium chips were first subjected to preliminary consolidation and then directly extruded using the KOBO process. The properties of the recycling final product were examined and compared with those of the as-received, solid cp-titanium Grade 2 (reference material). The recycling process yielded a well consolidated solid titanium rod with a diameter of 8 mm. The consolidation effect was high which was confirmed by the fact that only a small number of voids and discontinuities distributed randomly were observed. The final material had a homogeneous grained structure. The equiaxial grains observed on the transverse and longitudinal sections had similar sizes. The mechanical properties of the recycled material (estimated based on the results of microhardness measurements and uniaxial compression tests) were comparable with those of solid cp-titanium Grade 2.

Publikacje, które mogą Cię zainteresować

artykuł
#134384Data dodania: 8.6.2021
Solid state processing of titanium chips by an unconventional plastic working / Krzysztof Topolski, Paweł OSTACHOWSKI // Journal of Materials Research and Technology ; ISSN 2238-7854. — 2021 — vol. 13, s. 808–822. — Bibliogr. s. 821–822, Abstr. — Publikacja dostępna online od: 2021-04-21
artykuł
#31330Data dodania: 7.2.2007
New forging method of bevel gears from structural steel / W. BOCHNIAK, A. KORBEL, R. SZYNDLER, R. HANARZ, F. STALONY-DOBRZAŃSKI, L. BŁAŻ, P. Snarski // Journal of Materials Processing Technology ; ISSN  0924-0136 . — 2006 — vol. 173 iss. 1, s. 75–83. — Bibliogr. s. 83, Abstr.